Wropo logo
Zászló Törökország Törökország
Adj fel egy Hirdetést
  1. Otthon
  2. Üzlet
  3. Üzleti Lehetőségek
Kérjük, vegye figyelembe, hogy a Wropo minősített hirdetési platformként működik, és nem igazolja a hirdetőket vagy azok listáját. Tekintse meg többet

Nincs közvetlen ismerete a felhasználókról, és nem is irányítjuk tevékenységüket. Kerülje el a pénz elküldését előre az embereknek, akiket nem ismer. Mindig óvatosan járjon el az online tranzakciók során, és a folytatás előtt ellenőrizze az információkat. Kevesebb megtekintése

Mold Powder Thickness Detection System for Continuous Caster

Floria Liang Üzleti Lehetőségek, Isztambul, IMG-0
Fordítás: Zászló HU Eredeti

Overview
Mold powder is mainly used in the continuous casting and steelmaking process, evenly sprinkled on the molten steel surface in the mold to lubricate, keep warm, prevent oxidation and absorb non-metallic inclusions. Mold powder is an indispensable auxiliary production material in the production process. In the process of evenly distributing the mold powder to the molten steel surface of the mold, the amount of mold powder should be controlled, and the thickness of the mold powder should be within a certain range. If the coverage thickness of the mold flux is too thin, it will cause no heat preservation, oxidation of molten steel, inclusions, cracks, large drawing resistance, steel leakage, etc. At the same time, the coverage thickness of mold flux should not be too thick, they cant melt in time with too much mold powder, if the molten steel is churning, it is easy to get the mold powder into molten steel at this time, resulting in mold leakage. Therefore, the amount of mold powder must be controlled within a reasonable range. The detection and control of mold flux thickness is very important, especially for the steel plants which are strict with the steelmaking production process.

The detection principle
The mold flux detection system developed by Wuhan CenterRise M&C Engineering CO., Ltd. uses the laser triangular sensor fixedly installed above the mold to obtain the height h1 by scanning the upper surface layer of mold flux with high-precision laser triangulation. When the laser measuring head is placed each time, the height h3 of the upper nozzle of the mold will be marked, and the system through the PLC system which is connected to the continuous casting machine through the network to introduce the height h1 of the mold liquid level. Through the calculation of three heights, we can get the thickness of mold powder H = 900-h1-(h3-h2)mm (900mm is the depth of mold).

The features
The system adopts a high-precision laser triangulation distance meter, which can measure the thickness of the mold flux with high speed and high precision, and the accuracy can reach 1mm.
The equipment is easy to install and use. When we are using, the laser rangefinding sensor can be placed directly above the mold without affecting production.
The system can be interlocked with the automatic mold powder feeding system to automatically adjust the amount of mold powder, so as to automatically control the amount of mold powder within a reasonable range and realize intelligent automatic mold powder feeding.
Non-contact measurement, the system only needs ventilation protection, simple and stable to use.

The parameters
Measurement range0-50mm
Temperature measurement range: -20-700
Equipment installation distance

Ár: ₺0
Whatsapp: Nem
Kategória: Üzleti Lehetőségek
Beír: Magánszemély
Város: Isztambul
Régió: Isztambul
Referencia: TR-59E4CDA2EC
Utolsó frissítés: 1 éve
Látogatások: 187
Floria Liang Avatar Bg

Floria Liang

Regisztrált 2024. január 10.
További hirdetések
Online Surface Quality Inspection System for Continuously Cast Product CCD

1

Online Surface Quality Inspection System for Continuously Cast Product CCD

₺0

Isztambul

Üzlet » Üzleti Lehetőségek

Magánszemély

1 éve

Mold Breakout Prediction System for Continuous Casters

1

Mold Breakout Prediction System for Continuous Casters

₺0

Isztambul

Üzlet » Üzleti Lehetőségek

Magánszemély

1 éve

Laser Velocimetry and Length Measuring Instrument

1

Laser Velocimetry and Length Measuring Instrument

₺0

Isztambul

Üzlet » Üzleti Lehetőségek

Magánszemély

1 éve

Ladle Comprehensive Management System for Ladle

1

Ladle Comprehensive Management System for Ladle

₺0

Isztambul

Üzlet » Üzleti Lehetőségek

Magánszemély

1 éve

Handheld Thermocouple Calibrator for Steelmaking

1

Handheld Thermocouple Calibrator for Steelmaking

₺0

Isztambul

Üzlet » Üzleti Lehetőségek

Magánszemély

1 éve

Launch Your Sportsbetting App Clone in Record Time with Minimal Investment!

1

Launch Your Sportsbetting App Clone in Record Time with Minimal Investment!

₺2

Isztambul

Üzlet » Üzleti Lehetőségek

Magánszemély

10 hónapja


Wropo logo
  • Városok
  • Régiók
  • Országok
  • Adatvédelmi irányelv
  • Feltételek
  • F.A.Q.
  • Árképzés
  • Érintkezés

Wropo minősített hirdetési platformként működik. A harmadik fél hirdetők által felsorolt ​​termékeket vagy szolgáltatásokat nem birtokoljuk, nem kezeljük vagy garantáljuk.

© 2025 Wropo. Minden jog fenntartva.

Válasszon egy kategóriát